Q-See QSTD5304 - Manual (Page 47)

QSTD5304 Digital Video Recorder User Manual
47
1. Channel
Select the channel used by the PTZ camera.
2. Baud Rate
Select the Baud Rate of the PTZ camera. The default value is 9600.
3. Protocol
The communication protocol of PTZ camera.
4. Address
The communication address of PTZ camera, also known as device ID
Notice: Baud rate and protocol should be found in user’s manual of the PTZ camera
PTZ CONTROL INTERFACE
Fig 4.20 PTZ Control
Click button in Main Interface and enter PTZ Control interface shown
as Fig 4.20 PTZ Control.
You can control PTZ cameras using the function buttons on the right side of
the interface. Functions of the buttons are described in the table below:
Icon Description Icon Description
Right
Moves the camera to the right Left
Moves the camera to the left.
Up
Moves the camera up Down
Moves the camera down
FOCUS+
Moves the camera’s focus
further away
FOCUS-
Moves the camera’s focus closer
ZOOM+
Zooms the camera out ZOOM-
Zooms the camera in.
IRIS+
Increases the camera’s light. IRIS-
Decreases the camera’s light.
Go to a Preset Point Set a Preset Point
Adjust PTZ speed
Sets the rotational speed of the camera