Ordering numbers, Under- and overvoltages in the mains supply, Loss of a phase in the mains supply – Kemppi Pro Evolution 3200 User Manual

Page 13: Disposal of the machine

Advertising
background image

Kemppi pro evolution 300, 400, 500, 300 mvu, 400 mvu, 500 mvu / 0617 – 13

© Kemppi oy

8. orderIng numbers

Kemppi Pro Evolution 3200

6131320

Kemppi Pro Evolution 4200

6131420

Kemppi Pro Evolution 5200

6131520

Kemppi Pro Evolution 3200 MVU

613132003

Kemppi Pro Evolution 4200 MVU

613142003

Kemppi Pro Evolution 5200 MVU

613152003

Return current cable

5 m - 50 mm

2

6184511

Return current cable

5 m - 70 mm

2

6184711

Cable for MMA welding

5 m - 50 mm

2

6184501

Cable for MMA welding

5 m - 70 mm

2

6184701

PL

6185801

PX

6185802

R10

6185409

R20

6185419

Remote controlled interconnecting cable 10 m

6185481

T10

6185231

T120

6185252

P40

6185264

P40L

6185264L

P30W

6185262

7.3. under- and overvoltages In the maIns supply

Primary circuits of machine are protected against sudden, transient overvoltages.
Machine is designed to withstand 3 x 440 V voltage continiously (see technical data). See to

it that voltage is kept within admissble limits especially when mains supply is taken e.g. from

combusition engine generator.
If the mains has undervoltage (under approx. 300 V), machine control stops to operate automa-

tically.

7.4. loss of a phase In the maIns supply

Loss of a phase causes noticeable poorer welding properties than normally or the machine

doesn’t get started at all. Loss of a phase can be due to following:
- blowing of mains supply fuse
- defective mains cable
- bad connection of mains connection cable on terminal block or plug of machine

7.5. dIsposal of the machIne

Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic

Equipment and its implementation in accordance with national law, electrical equipment

that has reached the end of its life must be collected separately and returned to an

environmentally compatible recycling facility. As the owner of the equipment, you should

get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human

health!

Advertising
This manual is related to the following products: