Kemppi Pro Evolution 3200 - Manual (Page 3)

Kemppi pro evolution 300, 400, 500, 300 mvu, 400 mvu, 500 mvu / 0617 – 3 © Kemppi oy
1. preface
1.1. IntroductIon
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual
is arranged to give you a good understanding of the equipment and its safe operation. It also
contains maintenance information and technical specifications. Read this manual from front to
back before installing, operating or maintaining the equipment for the first time. For further
information on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2. product IntroductIon
Kemppi Pro Evolution 3200, 4200 and 5200 are multi-operator power sources designed for
demanding professional use. They are suitable for MMA/MIG and pulsed MIG as well as for
TIG welding in DC. Kemppi Pro Evolution can be used as power source with a welding auto-
mate or robot.
Power control of Kemppi Pro Evolution power source has been realized with at approx. 20 kHz
frequency IGBT transistors operating and control unit with microprosessor.
Kemppi Pro machines can be seen in operating instructions for each unit. Mounting intructions
for control panels PX and PL are in their packages.
This manual handles installation and use of Kemppi Pro Evolution power sources.
This equipment’s electromagnetic compatibility (EMC) is designed for use in an
industrial environment. Class A equipment is not intended for use in residential loca-
tion where the electrical power is provided by the public low-voltage supply system.