Kleenmaid SOE100A - Manual (Page 13)

13
K
eeping food warm
H ow to use your oven
As soon as the steam removal phase has been
completed, you can keep dishes warm in the
oven area.
Press on the button (STOP). The audible signal
and display are then deactivated.
The dishes are kept warm and the fan operates at the same time
until the door is opened. The fan continues to run for 2 to 3 minutes
after the door is opened.
The door remains closed (do not open).
I
nterrupting the steam cooking process
1.
Press the (STOP) button.
The water level display
begins flashing
and the steam evacuation phase will then
be shown in minutes and seconds.
2. After three minutes, it is possible to open
the door.
We recommend that you do not interrupt the steam cooking process.
If , however, you wish to do so, you should proceed as follows:
D
isplaying the water level/
R
efilling
When "recipient empty" begins flashing and an
audible signal is emitted, the cooking programme
is interrupted.
1. Open the door and fill the water tank.
2. Reinsert the filled tank until it clicks into place
and then close the door. As a result of this,
the flashing and audible signal are
interrupted.
3. Press the (START) button.
The cooking process continues and the
water level display appears on the screen.
The quantity of water contained in the tank is shown on the
screen.
Kleenmaid vapeur_GB.qxd 10/07/03 10:29 Page 13