Kleenmaid SOE100A - Manual (Page 16)

16
The audible signal on the
timer continues during the
cooking process.
You are hearing the
pump, this is normal.
-
The display lights up and
the cooking time goes by
but no steam cooking
takes place.
The demonstration
programme has
inadvertently been
activated.
Set to the standard
programme.
1. Turn off the appliance
using the (Stop) button.
2. Open and close the
door.
3. Press the (Start) button.
4. Select 29 minutes using
the (+) button.
5. Press the (Start) button
for 5 seconds.
6. The display will disap-
pear and an audible signal
will be emitted. The
appliance can once again
be used.
T roubleshooting
The locking symbol is
lit
.
The child safety (lock) is
activated.
Deactivate the child safety.
I f you realize that... P ossible causes W hat should you do?
There is a little water in
the drip channel after
cooking.
This is normal. Dry with a cloth
Kleenmaid vapeur_GB.qxd 10/07/03 10:29 Page 16