Kleenmaid BX521V - Manual (Page 7)

6
Leveling Refrigerator
CAUTION !
Protect soft vinyl or other flooring with cardboard, rugs
or other protective material to avoid property damage.
If your refrigerator requires an ice maker water supply
connection, proceed to
Connect ice maker water supply
section before leveling your refrigerator.
1.
Plug in power cord.
2. Move refrigerator into final location.
3. Level refrigerator using a level placed on top of the
refrigerator.
• Remove toe grille (A). Remove bottom hinge
cover (B).
• Turn roller adjustment screws (C) to raise or lower
refrigerator cabinet. Front of refrigerator must be
¼" (6 mm), or ½ bubble on your level, higher than
the back of your refrigerator.
• Make sure refrigerator cabinet is level from side to
side by adjusting left and right roller adjustment
screw
(C).
• Turn stabilizing leg (C) clockwise until firmly against
floor.
4. Replace toe grille (A) and bottom hinge cover(B). See
markings on inside of toe grille to insure proper
placement.
• Snap top portion into place first. Press down on
lower part of grille until bottom portion snaps into
place.
A
B
C
D
5. Review Installation Checklist in Owner's Manual with
consumer.