Kleenmaid KFL1600 - Manual (Page 15)

130715
display. Function is deactivated by another pressing
of the SELECTION knob (C).
Spin speed / Rinse hold
Best recommended spin RPM for the selected
program appear on the display. Using the button
(C) in some models you can increase the selected
RPM (1300-1800) or reduce in steps till “0”, when
all spins are off. Last selection is RINSE HOLD
meaning that laundry will remain soaked in the last
rinse water. RINSE HOLD function is selected if
you want the laundry not to be excessively creased
in case you are unable to remove it from the drum
immediately after the end of washing cycle. This
is specially handy for washing of synthetics and
delicate laundry . However, it is not recommended
for wool or manual wash .
Extra rinse/ Water clean sensor
This function is for persons, especially sensitive to
detergents. Using the SELECTION knob (C) you
may select one or two extra rinses, or activate the
Water clean sensor (S).
By activating the extra rinse the display indicates
adequately increased quantity of water. If the water
clean sensor is activated, the display indicates the
symbol “S” instead of water quantity. In such cases
the machine will select the appropriate number of
rinses in relation to how clean the rinsing water is,
detected (measured) by the sensor.
Higher water level
For washing heavily stained laundry.
Using the SELECTION knob (C) you may increase
quantity of water for rinsing one or two extra times;
for certain programs this function is available also
for washing. Appropriately larger quantity of water is
indicated by the display.
15