Kleenmaid KFL1600 - Manual (Page 16)

130715
Cold wash
For washing less soiled or colour-sensitive clothes.
Upon switching this function ON, the heating
function of this cycle is switched OFF, therefore the
whole program is adequately shortened.
Pre-wash
Used for washing heavily stained laundry, especially
with superfi cial stains. In default setting the pre-
wash function is off. It is activated by pressing the
SELECTION knob (C) on programs for cotton,
synthetics, delicate and mixed laundry.
Soak
This program is intended for removal of stubborn
stains. In default setting the soaking function is off.
It is engaged by pressing the SELECTION knob (C).
Soaking time may be set from 1 hour to maximum 6
hours, in 30 minute steps. At the end of the present
time the machine automatically starts the selected
washing program.
Delay start
The function enables delaying the start of the
washing procedure for up to 20 hours, in 30 minute
intervals for the fi rst two hour delay, and in hourly
intervals for the rest.
Delay is set by pressing or keeping pressed the
SELECTION knob (C) for the required time of delay.
In case you wish to change or suspend the delayed
start after starting the machine with the START knob
(F), you may do so by pressing the MENU knob (B).
The delayed start appears; using the SELECTION
button (C) reset the delay period.
End of cycle
Caution: prior to setting this check whether the
current time of day is set correctly (see section
Special functions). Set the time you want the
16