Kleenmaid KFL1600 - Manual (Page 23)

130715
•
Before washing sort out the laundry according
to the type, degree of dirtiness and colour
resistance.
•
Prior to selecting the washing program consult
the laundry tab of the garment with information on
washing of the garment (see Maintenance chart
on Page 33).
•
Wash separately new coloured textile products
when washing for the fi rst time.
•
Wash heavily soiled laundry in small quantities
and add more detergent.
•
Treat stubborn stains with special stain remover. It
will save energy.
•
With lightly stained laundry select a washing
program without a pre-wash. Use a short program
and select lower washing temperature. This way
you can save up to 50% of energy.
•
Avoid washing small quantities of laundry
because of energy saving and for better
performance of the appliance.
•
The largest allowed quantity of dry laundry is
indicated in the Program chart.
•
Before washing empty pockets, close zips
fasteners, and remove any metal fasteners or
badges that might clog the drain or damage the
laundry or drum interior.
•
Loosen stacked laundry prior inserting it into the
drum.
•
Use only detergents for front load machine wash.
•
Add powder or liquid detergents according to the
manufacturer’s instructions.
•
If water hardness level exceeds 14°dH degrees,
the use of water conditioner is required. Any
damage to the heater due to failure to use a water
conditioning agent shall not be covered by this
warranty.
23
Tips for washing and energy saving