Kleenmaid KFL1600 - Manual (Page 30)

130715
In case you were not successful in repairing the
malfunctions in spite of the above troubleshooting
chart call your nearest authorised service centre on
1300 652 100.
Service calls resulting from any failure arising due to
customer error or not checking the troubleshooting
chart are not covered by warranty and any repair
expenses are to be paid by the customer.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
30
Failure Possible cause Remedy
Laundry is stained
after washing. You used liquid detergent or
detergent for coloured laundry
which does not contain whitener. Use the detergent containing
whitener.
White powdery
residues on the
laundry. It is not the consequence of bad
rinsing, but because of neo-
phosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry. Immediately rinse the laundry once
again.
• Use liquid detergents which do not
contain zeolites.
• Try removing the residues with the
brush.
Detergent residues in
the dispenser. Low water fl ow pressure.
Some detergents may stick to
the dispenser. clean dispenser
regularly. • Clean the inlet hose fi lter net.
• In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Softener is not
completely rinsed,
or water is left in the
dispenser dish. Sucking cover is not correctly
positioned or is clogged. Clean the dispenser and fi rmly fi x the
cover in place.
Washing time is
longer than usual. • The machine switched on
the UKS* system because of
uneven laundry load.
• Power failure has occurred.
• Washing program time may be
prolonged for 10 minutes and the
machine still functions perfectly.
Time is prolonged for the power
failure period.