Vertex Standard VX-264 - Manual (Page 21)

VX-264 O
perating
M
anual
19
a
dVanced
o
Peration
sql s
et
You can manually adjust the squelch level using this func-
tion:
r
Press, (or press and hold), the assigned PF key. A tone
will sound, and the current squelch level will appear
on the display.
r Press the SIDE-1/SIDE-2 buttons (or [A]/[B] keys)
to select the desired squelch level. Available selections
are “−8” to “+8”.
r Press the [D] key to store the new setting. The display
indicates “-.SAVED.-” briefly, then reverts to the nor-
mal channel indication.
You may cancel the new setting by pressing the [C]
key. In this case, the display indicates “-.CANCEL.-”
briefly.
b
eeP
oFF
Press, (or press and hold), the assigned PF key to dis-
able any radio beeps temporarily. Press again, (or press
and hold again), the assigned PF key to enable any radio
beeps.
When the Beep Off function is “on” and “off”, the display
indicates briefly “BEEP.OFF” and “BEEP.ON”.
W
hisPer
Press, (or press and hold), the assigned PF key to increase
the microphone gain; allowing the operator to speak in a
low voice (whisper) temporarily when transmitting. Press
again, (or press and hold again), the assigned PF key to
resume normal microphone gain.
When the Whisper function is “on” and “off”, the display
indicates “WHISP.ON” and “WHISP.OFF” briefly.
Vox
(r
equires
Vox c
omPatible
h
eadset
)
Press, (or press and hold), the assigned PF key to activate
the VOX function; allowing hands-free, automatic activa-
tion of the transmitter, initiated by voice input into the
microphone. You may disable the VOX function tempo-
rarily by pressing the PTT switch.
Press again, (or press and hold again), the assigned PF
key to resume normal operation.
Note 1: when the VOX function is activated by operation
from the external equipment, a small dot (“Ÿ”) will be in-
dicated at the bottom right of the display (see page 11 of
this manual).
Note 2: when the VOX function is “on” and “off”, the dis-
play indicates “VOX.ON” and “VOX.OFF” briefly.