K-Patents PR-23 for K-Patents Appendix - Manual (Page 26)

Document/Revision No. IM-GB-PR23-VACCINES: Rev. 1.01 Effective: November 1, 2013
26
Appendix to the Instructions Manual PR-23
CALC is the calculated concentration value without Field calibration adjustment, CONC is
the final concentration value including Field calibration adjustment. T indicates temperature,
while n
D
is the refractive index value n
D
of the sensor. The graph is automatically scaled
based on measurement values. Time scale for the graph can be set to 3, 10 or 30 minutes.
The time scale can be altered by clicking on the grey area of the x-axis. Measurement
values older than 2 hours are discarded. The image can be dragged horizontally to see
older data values.
Figure 4.3 Computer Communication Software CC-11: Measurement trend view.
4.2.4 Data Logging Menu
All measurement and diagnostics data can be logged into an Adobe Acrobat PDF document
file on the computer via the Data logging menu (Figure 4.4). CC-11 is then shown as a disk
drive and all local files can be copied for further use. The file name is automatically set by
the CC-11.
Before starting the data logging, set the INTERVAL by clicking on the grey area (Figure 4.5).
Default value for the interval is 10 seconds. The interval is set in seconds.
Start logging by clicking on the START button.