La Crosse Technology WS-9620 User Manual
Page 14
14
12/24 HOUR TIME DISPLAY SETTING
1.
After setting time reception ON/OFF, press the SET key, “12h” or “24h” flashes in
the LCD. (default 12 h)
2.
Press the + key to select the “12h” or “24h” display mode.
3.
Press the SET again to confirm and to enter the “Manual Time setting” or exit
the setting mode by pressing the CH key.
Note: When 24h mode display is selected, the calendar format will be date and month
display. When 12h mode display is selected, the calendar format will be month
and date display.
MANUAL TIME SETTING
In case the Weather Station is not able to detect the WWVB-signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a
normal Quartz clock.
To set the clock:
1.
The hour and minute digits start flashing in the time display section.
2.
Use the + key to adjust the hours and then press SET key to go to the minute
setting.
3.
The minute will be flashing. Press the + key to just the minutes.
4.
Confirm with the SET key and enter the “Calendar Setting” or exit the setting
mode by pressing the CH key
flashing
Minutes (flashing)
Hours (flashing)