La Crosse Technology WS-9620 - Manual (Page 4)

4
• WWVB Radio controlled time with manual setting options
• Time reception ON/OFF
• 12/24 hour time display
• Hour and minute display
• Time zone option ±12 hours
• Wireless transmission at 915 MHz
• Signal reception intervals of 16-seconds
• Weather forecasting with 15 easy-to-read icons featuring
Oscar Outlook Forecaster
• Weather forecast icon sensitivity setting
• Temperature display in degrees Fahrenheit (°F) or Celsius (°C) selectable
• Outdoor temperature and humidity display with MIN/MAX recording
• All MIN/MAX outdoor recordings show date and time received
• All MIN/MAX recordings can be reset
• Can receive up to three outdoor sensors
• LCD contrast setting
• Low battery indicator
• Table standing/ Wall mounting
SETTING UP:
When one sensor is used
1.
First, insert the battery into the thermo-hygro sensor. (see “Install and replace
batteries in the thermo-hygro sensor“).
2. Immediately after and within 2 minutes, insert the batteries into Weather Station
(see “Install and replace batteries in the Weather Station”). Once the
batteries are in place, all segments of the LCD will light up briefly. Following the
time as 12:00 and the "Oscar Outlook" icon will be displayed. If these are not
displayed after 60 seconds, remove the batteries and wait for at least 10
seconds before reinserting them.
3. After inserting the battery into the sensor, the Weather Station will start receiving
data from the sensor. The outdoor temperature/ humidity and the signal
reception icon should then be displayed on the Weather Station. If this does not