La Crosse Technology WS-9620 - Manual (Page 24)

24
MOUNTING
POSITIONING THE WEATHER STATION:
The Weather Station has been designed to be hung onto a wall or free standing.
To wall mount
Choose a sheltered place. Avoid direct rain and sunshine.
Before wall mounting, please check that the outdoor temperature
and humidity values can be received from the desired locations.
1.
Fix a screw (not supplied) into the desired wall, leaving the
head extended out the by about 5mm.
2. Remove the stand from the Weather
Station by pulling it away from the base
and hang the station onto the screw.
Remember to ensure that it locks into
place before releasing.
Free standing
With the
detachable stand, the Weather Station can be
placed onto any flat surface.
POSITIONING
THE THERMO-HYGRO SENSOR:
The sensor is supplied with a holder that may be
attached to a wall with the two screws supplied.
The sensor can also be position on a flat surface by securing
the stand to the bottom of the sensor.