Denon DN-M991R - Manual (Page 24)

24
ENGLISH
(2) Direct Search for Cue Points
When cue points are stored on a track, they can be used for direct
search.
2
Set the cue direct search mode.
Press the CUE SEARCH button.
NOTE: The cue direct search mode cannot be set if no cue
points are stored on the disc.
3- 1
Search for the cue point.
Press the STANDBY/CUE button.
The Cue1 point is searched for and the standby mode is
set at that position.
Press the STANDBY/CUE button again to search as
follows:
3- 2
Cue points can also be searched for by turning the select
knob.
4
Cancel the cue direct search mode.
The set returns to the normal operating mode.
CUE
SEARCH
CUE
SEARCH
Lit
Lit
Lit
Flashing
Flashing
When turned clockwise:
When turned counterclockwise:
Off
1 Load the cartridge.