Denon DN-M991R - Manual (Page 30)

30
ENGLISH
(2) Editing Function Select
1 Load the cartridge.
2
Set the edit mode.
Press the MODE button.
4
Select the edit function.
Turn the select knob.
NOTES:
• “Cue Erase?” is not displayed if no cue signals is set.
• “Divide?”, “Combine?” and “Move?” are not displayed
in the stop mode.
Lit Lit
Lit
5
After selecting the edit function in item 3, perform the
operations for the various edit items.
6
Cancel the edit mode.
Press the MODE button before press the SELECT knob.
Cancel the edit function. (after selected the edit item.)
Press the MODE button before press the REC button.
(3) Erasing Cue Signals ‹Cue erase function›
1- 1
Set the cue mode at the position of the cue signal you
want to erase.
Press the CUE SERCH button.
The cue direct search mode is set.
1- 2
Press the STANDBY/CUE button.
NOTE:
Press the CUE button again to search for “Cue2”, “Cue3”,
etc., and set the cue.
Lit
Lit Flashing
Flashing
2
Select the cue erase edit function. (see page 30.)
Select “Cue Erase?” and Press the SELECT knob.
3
The cue signal is erased and the mode returns to the edit
mode.
Lit
Off
Erase the cue signal.
Press the REC button.
Cue Erase? | page 30
Track Erase? | page 31
All Erase?
| page 31
Divide? | page 32
Combine? | page 32
Move? | page 33
Pitch? **.*% | page 33
Disc Name?
| page 34
Track Name? | page 34
3- 2
Set the edit function select mode.
Select the edit track and press the SELECT knob.
NOTE:
“Cue Erase?” is not displayed if no cue signal
is set.
3- 1
Select the edit track.
The track to be edited can be selected
(or changed) by turning the SELECT
knob.