Denon DN-M991R - Manual (Page 39)

39
ENGLISH
MESSAGES
Messages appear on the display when operating the set.
The meanings of the messages are described below.
Message Description
Indicates that editing was not possible.
Indicates that the track number cannot be incremented by pressing the REC button during recording.
Recording is not possible because of a problem in the TOC recording enable data.
Indicates that editing is complete.
Indicates that the cue search operation is being performed. (* is the cue number.)
Displayed at the beginning of the track name if cue signals are set for that track.
There is no more remaining time on the disc, or there are already 255 tracks on the disc.
Recording or editing is not possible with pre-mastered discs.
Displayed when changing the presettings if there is a problem with the memory storage operation.
Displayed when a system error occurs.
Displayed if there is a problem with the memory storage operation when the presettings have been reset
(initialized).
Displayed when initializing the presettings.
No hot start data.
Indicates that no track name or disc name has been set.
Indicates that no program has been input.
Indicates discs containing disc names but no tracks.
Data other than audio data is input.
Cue direct search mode is on.
Hot start data is loaded.
This means that a program has been input.
Program is preset. (* - 1 to 3)
Displayed if you attempt to program a 26 th step.
Displayed when you attempt to record or edit while the cartridge is in the accidental erasure prevention mode.
Sound will be recorded stereo.
Displayed when you attempt to set the recording mode on a disc containing 255 tracks.
Displayed when the MODE button is pressed.
12
Can,tEdit **
Can,tIncrmnt
Can,t Rec!
Complete!
Cue*
<Cue>********
Disc Full
DiscType Err
EEPROM Error
Error **
InitialError
Initial Set
No Data
No Name
No Program!
No Track
Not Audio!
Now Cue Src!
Now H Start!
Now Program!
Displayed when a locked operation is performed when play lock is preset. Play Lock!
PresetProg*!
Program Full
Protected
Rec Stereo
Track Full
UTOC Write?
Displayed when the selected track does not exist on the disc. No Sel.Track
Sound will be recorded monaural. Rec Mono
Displayed while the UTOC is being written. UTOC Writing