Dialogic DSI SS7MD - Manual (Page 43)

43
Dialogic
®
DSI SS7MD Programmer’s Manual Issue 3
Chapter 5: Program Execution
This chapter describes how to start the software and execute programs. It assumes that:
•
The software has already been installed. Refer to Chapter 3, “Installation” .
•
The system.txt configuration file has been modified correctly. Refer to Section 4.4, “System Configuration”
on page 29 .
•
The config.txt protocol configuration file has been modified correctly. Refer to Section 4.5, “Protocol
Configuration” on page 32 .
It contains the following sections:
•
Program Execution Overview
•
Program Execution Under Linux and Solaris