Leprecon LP-X24 V.3 Addendum Video Features - Manual (Page 3)

The output to the LCD is minimized and the full video display appears on the monitor.
The image below is a sample LPX-24 Video Setup Mode screen. The screen that you
see will vary depending upon whether you were in Run, Record or Setup at the time you
switched to Video Mode.
To switch to LCD Mode:
(1) If you are not already in Setup mode, press the Setup button on the console.
(2) Using the mouse, click the LCD Mode button.
If you lose monitor output for any reason, you may switch to LCD Mode at any time by
pressing the first softkey on the console (above the LCD).
Orientation to Video Mode
If you are familiar with the LPX-24, you will quickly adapt to Video Mode with just a few
pointers.