Power reset the unit when the process finish, Unplug and re-plug the power cord to take effect.) – Lumens Technology DC192 Firmware Upgrade Instruction User Manual
Page 4
Advertising
DC192 – Firmware (FW) Upgrade Instruction
2.7 Power reset the unit when the process finish.
(Unplug and re-plug the power cord to take effect.)
2.8 After re-plug the power cord, the unit will power on automatically and continue
the FW upgrade. (around 1min taken)
*Note: Please do not stop the upgrade process which may cause the unit shut down.
Advertising
This manual is related to the following products: