Lumens Technology PC168 - Manual (Page 17)

English - 16
Chapter 5 Start Using

When using the remote control, aim at the remote sensor on the PC168, and
press the power button.

Once PC168 is turned on, the LED on the control panel will flash a few times
and stay lit. Please contact your distributor if the LED is not on.
1. Place an object to be displayed under
the camera.
2. Turn on Power .
3. Adjust the gooseneck and lens to the
appropriate positions.
4. Press [AUTO TUNE] button to
optimize the image. You are ready to
teach/present.
 Each time the camera head is moved,
please locate it and then press
[FOCUS] to refocus the lens.