Lumens Technology PC168 - Manual (Page 38)

English - 37
Chapter 8 Connecting to Microscope
1 Mount the microscope adapter onto the microscope.
<Note> The Microscope adapter accessories are applicable to eyepieces of about
Ø 28.4mm.
2 Connect the lens of PC168 with the microscope adaptor
3 Select the [Microscope] mode
3.1. When using the control panel or remote control
3.1.1. Press [MENU] to enter the setting menu.
3.1.2. Press [], [], [], or [] to select [Image mode].
3.1.3. Press [] or [] to the [Microscope].
3.1.4. Press [MENU] to exit.
4 If the image is not clear
4.1. Please adjust the focus of microscope.
4.2. Please press the [FOCUS] button on either side of the PC168 lens to activate
the auto focus.
5 Digital Zoom
5.1. Press [MENU] to enter the setting menu.
5.2. Press [], [], [], or [] to select [Setting].
5.3. Press [] or [] to the [Control].
5.4. Press [] to select [Digital Zoom].
5.5. Press [] or [] to the [On].
5.6. Press [MENU] to exit.