Getting started, 3 getting started – Lumens Technology DC158 User Manual
Page 13
Advertising
English
-
12
2. Connect the VGA cable from the VGA IN port on the DC158 to the VGA
OUT port on the computer.
3. Connect the RS-232 Adapter (Optional) to the RS-232 port on the
DC158 and the RS-232 port on the computer.
4.3 Getting Started
Control panel
Remote Control
To turn on the DC158 with the
remote control, aim at the remote
sensor at the DC158 and press the Power button.
Once the DC158 is powered on, the LED on the projector will flash a
few times and then remain lit. Contact your distributor if the LED fails
to light.
Advertising