Lumens Technology DC158 - Manual (Page 25)

English - 24
From the remote control:
1. Press [PBP] to enter the photo selection screen.
2. Press [] or [] or [] or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [ENTER] to switch between the stored image and the live image.
5. Press [] or [] to move the selected image left or right.
6. Press [ZOOM+/-] to zoom in/out from the live image
7. Press [PBP] to return to the stored image screen.
8. Press [MENU] to exit.
From the control panel
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select the [Display] menu.
3. Press [] to select [PBP].
4. Press [PBP] to enter the photo selection screen.
5. Press [] or [] or [] or [] to select the desired file for comparison.
6. Press [ENTER] to activate image comparison.
7. Press [] or [] to move through selected images.
8. Press [ZOOM+/-] to zoom in/out from the live image
9. Press [PBP] to return to the stored image screen.
10. Press [MENU] to exit.
7.17 I would like to reduce the image noise (Projector
Type)
1. This function enables Document Camera to automatically clear image
noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to
improve the image quality.
2. If there is special noise when VGA out is connected, please set DLP
option to improve the image quality.