Lumens Technology DC158 - Manual (Page 30)

English - 29
Chapter 8 Connecting to a Microscope
1 Mount the microscope adaptor in the accessories pack onto the microscope
<Note> The Microscope adapter fits eyepieces of about Ø28.4mm.
2 Connect the lens of the DC158 to the microscope adaptor.
3 Select the Microscope mode
3.1. From the control panel or remote control
3.1.1. Press [MENU] to enter the on-screen menu.
3.1.2. Press [] or [] to select [Display].
3.1.3. Press [] to select among [Mode] modes.
3.1.4. Press [] or [] to select [Microscope].
4 If the image is fuzzy:
4.1. Adjust the focus of microscope.
4.2. Press the [FOCUS] button on either side of the DC158 lens to activate
the auto focus.