Lumens Technology DC265 - Manual (Page 31)

English - 30
7.12 I would like to record videos (Record)
7.12.1 Setting the image quality
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage].
3. Press [] to [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [Menu] to exit.
7.12.2 Recording motion images
1. Press [Record] on the remote control or control panel to start
recording videos.
2. Press [Record] again to stop recording.
3. Record sounds with the built-in microphone of the control panel.
7.12.3 Playing videos
1. Press [Source] on the remote control or control panel to display
thumbnails of all video recorded.
2. Press [] or [] or [] or [] to select the thumbnail you want you
view.
3. Press [Enter] for full-screen play.
4. Press [] or [] to turn to the previous/next video.
5. Press [Source] to exit.
[Note] Only the MOV files recorded can be played and live sound
output is not available; additional amplifier can be connected to
the PHONE port.
7.13 I would like to switch a part of the live image (PAN)
If you use the remote control or the control panel:
1. Press [PAN] to enter the image pan mode
2. Press [] or [] or [] or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.