Lumens Technology DC265 User Manual
Page 35
English
- 34
6. Press [] to [Logo Show time], and press [] or [] to modify the show
time.
7. Press [MENU] to exit.
7.19 I would like to set / change the password (Lock Down)
7.19.1 Setting the password
1. Press [Menu] on the
control panel to enter the setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] to [Lock Down].
4. Press [] or [] to select [On].
5. The screen will be displayed, as shown below.
6. Key in the password
Press the keys on the
control panel. All keys can be used as
part of the password except the [Power] and [Enter] keys.
The
maximum number of characters is 2. For example, you can
press [Source] + [Menu] as the password.
<Remark>The screen will show * while you enter the
password. Ensure that you remember the order in which
the keys are entered.
7. After completing the password, press [Enter].
8. The confirmation screen will be displayed, as shown below.
Enter the password again.
9. After you enter the password, press [Enter].
If the password is entered correctly, setup is completed. If the
password is incorrect, an error message is displayed and please
follows the screen instructions.
Key in Password
＊
＊
Confirm password