Lynx Studio LT-HD - Manual (Page 19)

Page 16
Aurora 8
Aurora 16 : 16-
channel mode
Aurora 16: 32-channel mode
192 I/O #1
(channels 1-8)
192 I/O #2
(channels 9-16)
Input
Format
g
N/A N/A N/A N/A
SR
Conversion
h
44.1 kHz- 96
kHz = N/A
176.4 kHz –
192 kHz =
toggles dual-
wire On/Off.
When On, all
AES inputs and
outputs will be
in dual-wire
mode – channel
count is
reduced by ½.
44.1 kHz- 96kHz =
N/A
176.4kHz – 192kHz
= toggles dual-wire
On/Off. When On,
all AES inputs and
outputs will be in
dual-wire mode –
channel count is
reduced by ½.
44.1 kHz- 96kHz
= N/A
176.4kHz –
192kHz = toggles
dual-wire On/Off.
When On, all
AES inputs and
outputs will be in
dual-wire mode –
channel count is
reduced by ½.
N/A
After selecting which I/O devices will occupy each of the 16 input and output channels available
on the hardware setup page, these devices can then be assigned to ProTools record and play
channels and labeled from the I/O Setup page
g h