Marantz NR1606 - Manual (Page 174)

o Power Off Control
Links the power standby of this unit to external devices.
All
(Default):
If power to a connected TV is turned off
independently of the input source, power
to this unit is automatically set to standby.
Video:
With an input source being selected that
is assigned either “HDMI”, “COMP” or
“VIDEO”, when you turn the power of the
TV off, power to this unit is automatically
set to standby. (v p. 182)
Off: This unit does not link with power to a TV.
0 “Power Off Control” can be set when “HDMI Control” is set to “On”.
(v p. 171)
o Power Saving
If “TV Speaker” is set as the audio output setting of your TV, this unit is
automatically set to standby mode to reduce power consumption.
This function is activated in the following cases.
0
When “TV Audio” is selected as the input source of this unit
0
When playing content from a device connected by HDMI
On: Use Power Saving function.
Off
(Default):
Do not use Power Saving function.
0 “Power Saving” can be set when “HDMI Control” is set to “On”. (v p. 171)
Contents Connections Playback Settings Tips Appendix
174
Front panel Display Rear panel Remote Index