Marantz NR1606 - Manual (Page 218)

o Auto Standby
Set so the unit power automatically switches to standby.
n MAIN ZONE
Sets the time for switching to auto standby when there are no audio or
video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on
the unit display and the menu screen.
60 min: The unit goes into standby after 60 minutes.
30 min: The unit goes into standby after 30 minutes.
15 min: The unit goes into standby after 15 minutes.
Off
(Default):
The unit does not go into standby
automatically.
n ZONE2
When there are no operations for a certain period of time as set here,
the power is automatically shut off even if there is audio or video input.
8 hours:
Put ZONE2 in the standby state after
about 8 hours.
4 hours:
Put ZONE2 in the standby state after
about 4 hours.
2 hours:
Put ZONE2 in the standby state after
about 2 hours.
Off
(Default):
Do not automatically put ZONE2 in the
standby state.
Contents Connections Playback Settings Tips Appendix
218
Front panel Display Rear panel Remote Index