Marantz SR5005 - Manual (Page 21)

18
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Connecting a digital camcorder
• You can enjoy video and audio from a digital comcorder.
• You can enjoy games by connecting a game machine via the AUX1 input
connector. In this case, select the input source to “AUX1”.
• For instructions on HDMI connections, see “Connecting an HDMI-
compatible device” (vpage 14).
Cables used for connections
Video cable (sold separately)
Video cable (Yellow)
Audio cable (sold separately)
Audio cable
(White)
(Red) R
L
R
L
Optical cable
R L
R L
OUT
AUDIO VIDEO
VIDEO AUDIO
R L
OUT
OPTICAL
OUT
Digital camcorder
NOTE
When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In this
case, use the monitor output of the same connector as the input.
Connecting a CD player
• You can enjoy CD sound.
• Select the connector to use and connect the device.
Cables used for connections
Audio cable (sold separately)
Audio cable
(White)
(Red) R
L
R
L
Optical cable
R L
R L
AUDIO
AUDIO
R L
OUT
OPTICAL
OUT
CD player
Set this to change the digital input connector to which the
input source is assigned.
“Input Assign” (vpage 48)
in Set as Necessary
Connecting a wireless receiver
(RX101)
By connecting a wireless receiver RX101 (sold separately) to this unit,
you can receive and playback audio signals from other devices using
the Bluetooth Communication Function.
• Use a Bluetooth device that is A2DP compatible (vpage 78 “A2DP”).
• You can also use wireless receiver RX101 as an external IR receiver.
• For instructions on the wireless receiver settings, refer to the
RX101’s operating instructions.
Wireless receiver RX101
Bluetooth device
(A2DP Compatibility)
Remote control unit
You can enjoy listening to music by connecting a wireless receiver
via the M-XPort input connector. In this case, set the input source to
“M-XPort”.
NOTE
To use wireless receiver RX101 as external IR receiver, set the remote
sensor function of this unit to “DISABLE” (vpage 62 “Remote control
settings”).