Output settings, Game”. (v p. 179), Ovideo mode – Marantz SR5010 User Manual
Page 179
Output Settings
Makes settings for video output.
0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.
0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler”
is set to anything other than “Off”. (“Resolution” (v p. 181), “Progressive
Mode” (v p. 182), “Aspect Ratio” (v p. 182))
0 “Output Settings” cannot be set when 4K signals are input.
0 “Video Conversion”, “i/p Scaler”, “Resolution”, “Progressive Mode” and “Aspect
Ratio” settings are stored for each input source. (“Video Conversion” (v p. 180),
“i/p Scaler” (v p. 180), “Resolution” (v p. 181), “Progressive
Mode” (v p. 182), “Aspect Ratio” (v p. 182))
o
Video Mode
Configure the video processing method to match the type of video
content.
Auto
(Default):
Process video automatically based on
the HDMI content information.
Game:
Always process video for game content.
Minimize the video delay when the video
is delayed compared to the button
operations on the controller of the game
console.
Movie:
Perform image processing that is suitable
for contents other than games.
0 If “Video Mode” is set to “Auto”, the mode is switched according to the input
contents.
179