Marantz SR5010 - Manual (Page 201)

ZONE2
(Default):
Setting to assign the unit’s built-in power
amplifier for ZONE2 and output the audio
in stereo.
Bi-Amp:
Setting to use the front speakers via the
bi-amp connection.
Front B:
Setting for playback using a second front
speaker. You can switch the playback
between front speaker A and B according
to your liking. Switch the front speaker
using “Front Speaker” in the menu.
(v p. 210)
Speaker Config.
Select whether or not speakers are present, playback capacity for low
bass frequencies and speaker size.
o Front
Set the front speaker size.
Large
(Default):
Use a large speaker that can adequately
play back very low bass frequencies.
Small:
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
0 When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
0 When “Front” is set to “Small”, “Center”, “Surround”, “Surr. Back” and “Front
Height” can not be set to “Large”.
Contents Connections Playback Settings Tips Appendix
201
Front panel Display Rear panel Remote Index