Marantz SR5010 - Manual (Page 186)

o HDMI
Set this to change the HDMI input connectors assigned to the input
sources.
1 / 2 / 3 / 4 / 5 / 6 / 7 /
Front:
Assign an HDMI input connector to the
selected input source.
– :
Do not assign an HDMI input connector
to the selected input source.
0 When “HDMI Control” is set to “On” in the menu, “HDMI” cannot be assigned
to “TV Audio”. (v p. 175)
o DIGITAL
Set this to change the digital audio input connectors assigned to the
input sources.
COAX1 (Coaxial) /
COAX2 /
OPT1 (Optical) / OPT2:
Assign a digital audio input connector to
the selected input source.
– :
Do not assign a digital audio input
connector to the selected input source.
o ANALOG
Set this to change the analog audio input connectors assigned to the
input sources.
1 / 2 / 3 / 4:
Assign a analog audio input connector to
the selected input source.
– :
Do not assign a analog audio input
connector to the selected input source.
o COMP (Component video)
Set this to change the component video input connectors assigned to
the input sources.
1 / 2:
Assign the component video input
connector to the selected input source.
– :
Do not assign a component video input
connector to the selected input source.
Contents Connections Playback Settings Tips Appendix
186
Front panel Display Rear panel Remote Index