Marantz SR5010 - Manual (Page 189)

o Decode Mode
Set the audio decode mode for input source.
It is normally recommended to set the audio input mode to “Auto”. But
we recommend changing it to “PCM” or “DTS” if the start of the source
is clipped or noise occurs.
Auto
(Default):
Detect type of digital audio input signal
and decode and play automatically.
PCM: Decode and play only PCM input signals.
DTS: Decode and play only DTS input signals.
0 This item can be set for input sources for which “HDMI” or “DIGITAL” is
assigned at “Input Assign”. (v p. 185)
Contents Connections Playback Settings Tips Appendix
189
Front panel Display Rear panel Remote Index