Sound modes and channel output, Front panel display rear panel remote index – Marantz SR5010 User Manual
Page 261
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p. 201)
.
Sound mode
Channel output
Front L/R
Center
Surround L/R
Surround Back
L/R
Front Height
L/R
Top Front L/R
Top Middle L/R
Front Dolby
Atmos Enabled
L/R
Surround Dolby
Atmos Enabled
L/R
Subwoofer
Direct/Pure Direct (2-channel)
S
Dz4
Direct/Pure Direct (Multi-channel)
S
D
D
Dz1
Dz1
Dz1
Dz1
Dz1
Dz1
D
Stereo
S
D
Multi Ch In
S
D
D
Dz1
Dz3
Dz3
Dz3
Dz3
Dz3
D
Dolby Surround
S
D
D
Dz2
D
D
D
D
D
D
DTS Neural:X
S
D
D
D
D
D
D
D
D
D
Dolby Digital
S
D
D
D
Dz3
Dz3
Dz3
Dz3
Dz3
D
Dolby Digital Plus
S
D
D
Dz1
Dz1
Dz3
Dz3
Dz3
Dz3
D
Dolby TrueHD
S
D
D
Dz1
Dz1
Dz3
Dz3
Dz3
Dz3
D
Dolby Atmos
S
D
D
D
D
D
D
D
D
D
DTS Surround
S
D
D
D
Dz3
Dz3
Dz3
Dz3
Dz3
D
DTS 96/24
S
D
D
D
Dz3
Dz3
Dz3
Dz3
Dz3
D
DTS-HD
S
D
D
Dz1
Dz1
Dz3
Dz3
Dz3
Dz3
D
DTS Express
S
D
D
D
Dz3
Dz3
Dz3
Dz3
Dz3
D
DTS:X
S
D
D
D
D
D
D
D
D
D
Multi Ch Stereo
S
D
D
D
D
D
D
D
D
D
Virtual
S
D
z1 A signal for each channel contained in an input signal is output as audio.
z2 Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v p. 203)
z3 Audio is output when the set sound mode name contains “+ Dolby Surround”.
z4 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 209)
261