Datalogic Scanning Industrial PDA - Manual (Page 10)

Battery Power
8 Pegaso™ Industrial PDA with Windows
®
CE
4. Replace the handstrap at the bottom of the unit.
Figure 2. Installing the Battery Pack
Battery Power
System Tray Battery Status Indicators
The System Tray displays icons to show the status of some battery conditions,
as shown in Table 1 .
Table 1. System Tray Battery Status Indicators
If you remove the battery pack or the battery fails, you have about 30
minutes to swap in a new battery pack or charge the battery pack
before the backup battery fails (if the backup battery has been fully
charged).
Battery Status Icons
Battery
Status
Icon Description
Backup
Battery Low
Condition
no icon
The battery status is updated in the control panel, but no icon is
displayed.
Backup
Battery Very
Low
Condition
When the backup battery is very low, the system tray contains a
very low backup battery CAUTION icon. In addition, a dialog box
pops up and alerts you that the backup battery is very low and
needs to be charged. The dialog comes up every five minutes until
you charge the backup battery.
Battery Pack
Seat this
end first
Battery Latch
(push in to release)
a b