Datalogic Scanning Industrial PDA - Manual (Page 28)

Resetting the Pegaso
26 Pegaso™ Industrial PDA with Windows
®
CE
Figure 15. Cold Reset
After Cold Reset
Cold reset clears the working RAM and initializes the file system. You will lose
any applications and data which are not stored in persistent flash memory (refer
to the PRG for more information).
• The splash screen will appear after a short period.
• Recalibrate the touch screen.
• The desktop appears with the application shortcuts on the screen.
• RF Network PC Card (if present) connects to the network system.
Safe Reset
A safe reset is a system reset that causes the device to be restored to factory con-
figuration.
Procedure to Safe Reset
After a Warm or Cold Reset when the splash screen is present, press and hold
the keys specified below. Press the two keys in the sequence shown. Both keys
must be held down for the unit to reset. Refer to
Figure 16 for the location of
the safe reset keys.
You will be asked for confirmation of whether you want to perform a safe reset.
Press
Enter to confirm or ESC to cancel.
19-Key Pegaso —
Press and hold: <ESC> + <5> .
The custom settings in the registry are persistent.
Cold Reset Button