Marantz SR-12S1N - Manual (Page 56)

53
ENGLISH
GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic
discharge or AC line interference has corrupted the information in the
equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect the plug to the AC
line supply
- re-attempt to operate the equipment
HOW TO RESET THE UNIT
Should the operation or display seem to be abnormal, reset the unit
with the following procedure.
The SR-12S1 is turned on, press and hold the CD-R/MD and AUX1
buttons simultaneously for 3 seconds or more.
Remember that the procedure will reset the settings of the function
selector, Surround mode, delay time, TUNER PRESET etc., to their
initial settings.
Memory backup
• In case a power outage occurs or the power cord is accidentally
unplugged, the SR-12S1 is equipped with a backup function to
prevent memory data such as the preset memory from being
erased.
DIGITAL
AV SURROUND RECEIVER SR-12S1 SURROUND
POEWER ON/OFF
DOWN
VOLUME
UP
PHONES L AUDIO R
AUX1
AUX1 INPUT
MEMO AUX2 CLEAR ATT
VIDEO
TV CD-R/MD
S-DIRECT
TAPE CD DSS
MULTI ROOM
LD VCR2/DVD-R
TUNER F/P T-MODE
GYRO TUNING DOWN UP
STAMDBY
VCR1 DVD
7.1CH INPUT
S-VIDEO
MULTI SPKR
AUTO TUNE