Marantz PM-11S3 - Manual (Page 15)

11
Getting started
Troubleshooting
Specifications
Index
Advanced connections
Advanced operation
Explanation terms
ENGLISH
Basic operation
Basic connections
Basic operation
Before use
Turning the power on
Press X ON/OFF on the unit .
• Power is turned on.
• The power indicator lights in blue.
• The unit will be ready to start playback after several seconds.
Turning the power standby
Press X AMP .
• The power is set to the standby mode.
• The Standby status indicator lights in
red.
• Press X AMP to turn on power from standby mode.
• You can also turn on power by using either INPUT SELECTOR
on this unit from standby mode.
NOTE
Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when going on vacation, either
press X ON/OFF to turn off the power, or unplug the power
cord from the power outlet.
Starting playback
1 Press SPEAKERS A/SPEAKERS B on the unit to
select the speaker system to be used for playback.
2 Use INPUT SELECTOR on the
unit or INPUT df on the remote
control to select the source.
• The input source changes as follows
with each press of the button:
RECORDER1
RECORDER2 PHONO
BALANCED
LINE-2 LINE-1 CD
3 Start playing back the source.
4
Adjust the VOLUME df on the unit or remote
control to the desired level.
Turning the power off
Press X ON/OFF on the unit .
• Power is turned off.
• All indicators will turn off.
1.PM-11S3U_ENG_0521.indd 11 2012/05/21 19:03:31