Using headphone set, Switching the illumination lamp setting, Muting the sound – Marantz PM-11S3 User Manual
Page 17
13
Getting started
Basic connections
Troubleshooting
Specifications
Index
Advanced connections
Advanced operation
Explanation terms
ENGLISH
Basic operation
Muting the sound
Sound can be muted temporarily.
Press
ATT
.
“ATT” appears on the display and the
sound is muted.
• To restore the sound, press the button
again.
n How to Set Attenuation Level
• Attenuation level can only be set using ATT on the unit.
• The attenuation level can be set at –20 dB, –40 dB, or –∞.
• The factory default setting is –20 dB.
1
Press and hold
ATT
on the unit for 2 seconds or
longer.
The attenuation level will appear on the display.
2
Press
ATT
on the unit.
• Each time the button is pressed, the attenuation level
changes as follows:
–20
–40
–00 (–
∞)
• If not operated for 2 seconds, the current setting is saved
and the display returns to normal.
Using headphone set
Plug headphones into
PHONES
jack.
• When using headphones, turn off the speaker output using
SPEAKERS A/SPEAKERS B.
• To prevent hearing loss, do not raise the volume level
excessively when using headphones.
Starting playback
Switching the illumination lamp
setting
The illumination lamps on the both sides of the unit main panel
can be turned on or off.
Press and hold
DISPLAY
on the unit for 2 seconds or
longer.
The on/off setting changes as follows with each press of the
button.
On
(Factory default)
Off
1.PM-11S3U_ENG_0521.indd 13
2012/05/21 19:03:33