Marantz ST6003 User Manual

Page 10

Advertising
background image

5

BASIC

OPERA

TION

ADV

ANCED

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

ENGLISH

CONNECTING THE ANTENNA TERMINALS

FM

Antenna

FM External

Antenna

AM Loop

Antenna

AM External

Antenna

ASSEMBLING THE AM LOOP ANTENNA

1.

Release the vinyl tie and take out the connection

line.

2.

Bend the base part in the reverse direction.

CONNECTING THE SUPPLIED ANTENNAS

Connecting the supplied FM antenna
The supplied FM antenna is for indoor use only.
During use, extend the antenna and move it in various
directions until the clearest signal is received.
Fix it with push pins or similar implements in the
position that will cause the least amount of distortion.
If you experience poor reception quality, an outdoor
antenna may improve the quality.

Connecting the supplied AM loop antenna
The supplied AM loop antenna is for indoor use
only.
Set it in the direction and position it to where you
receive the clearest sound. Put it as far away as
possible from the unit, televisions, speaker cables,
and power cords.
If you experience poor reception quality, an outdoor
antenna may improve the quality.

1.

Press and hold down the lever of the AM antenna

terminal.

2.

Insert the bare wire into the antenna terminal.

3.

Release the lever.

CONNECTING AN FM OUTDOOR ANTENNA

Notes:

• Keep the antenna away from noise sources (neon

signs, busy roads, etc.).

• Do not put the antenna close to power lines. Keep it

well away from power lines, transformers, etc.

• To avoid the risk of lightning and electrical shock,

grounding is necessary.

CONNECTING AN AM OUTDOOR ANTENNA

An outdoor antenna will be more effective if it is
stretched horizontally above a window or outside.

Notes:

• Do not remove the AM loop antenna.

• To avoid the risk of lightning and electrical shock,

grounding is necessary.

3.

Insert the hook at the bottom of the loop part

into the slot at the base part.

4.

Place the antenna on stable surface.

CONNECTING THE AC POWER CABLE

1.

Plug the supplied AC power cable to the AC IN

socket on the rear panel of the main unit.

2.

Plug the power cable into an AC outlet.

Advertising