Marantz ST6003 - Manual (Page 8)

3
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND FUNCTIONS
ENGLISH
u T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
“AUTO” indicator will be illuminated in the display.
(See page 6)
i TUNING/PRESET 34 (UP/DOWN)
button
This button used for tuning in the desired broadcasting
stations or to preset in the desired broadcasting
stations.
o BAND button
Press this button to switch between FM and AM in
the TUNER mode.
!0 F (Frequency)/P (Preset) button
During reception of AM or FM, you can change
the function of the UP/DOWN buttons for scanning
frequencies or selecting preset stations by pressing
this button.
!1 DIMMER button
When this button is pressed once display is dimmed.
When this button is pressed twice, the display is
turned off and the “DISP” indicator lights up.
Press this button again to turn on the display again.
!2 SLEEP button
This button is used for setting the sleep timer.
q POWER ON/STANDBY button
When it is pressed, the display window lights up, and
the power comes on. When it is pressed again, the
display window is extinguished, and goes into the
standby status.
STANDBY indicator
Lights up in red color while standby status.
w INFRARED receiving sensor
window
This window receives infrared signals from the
remote control.
e RDS indicator
This indicator illuminates when receiving RDS
broadcasts, and fl ashes during the RDS search.
r DISPLAY button
Press this button to change the FL display mode.
(See page 8)
t CLEAR button
Press this button to cancel the tuner preset station or
preset scan tuning. (See page 7)
y MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 6)
NAMES AND FUNCTIONS
FRONT PANEL
TUNER ST6003
w e q
r t y u o !0 !1 !2 i
FL DISPLAY
DISP AUTO TUNED ST
SLEEP
h
d s a f g
a DISP (Display Off) indicator
This indicator is illuminated when this unit is in the
display off mode.
s SLEEP timer indicator
This indicator is illuminated when the sleep timer
function is active.
d AUTO indicator
This indicator illuminates when the tuner’s Auto
mode is in use.
f TUNED indicator
This indicator illuminates when the tuner receives a
suffi ciently strong radio signal.
g STEREO indicator
This indicator illuminates when an FM station is
being tuned into stereo condition.
h Main Information Display
A variety of information is displayed on this indicator.
Frequency, PS, PTY, RT, stations name by manual
fi ling. etc.