Marantz VP-10S1 - Manual (Page 37)

33
ENGLISH
– Reset All
Resets all settings to their factory defaults except the user-selected gamma curve and the lamp life counter. When you select
“Yes”, the following message appears on the screen.
Select “Yes” and press the ENTER button.
❖
How to Operate the Config Menu
1. Select the desired menu item and press the
2
button.
The setting item will appear on the screen.
2. Use the
3
and
4
buttons to set the item.
3. Press the
1
button to enter the setting and return to menu item selection.
You can turn the trigger signal output from the TRIG. 2 jack on (12 V output)/off (no output) for each of the aspect modes: Full,
Normal, Zoom and Through. This trigger signal can be used to automatically match the screen aspect mode to projector operation,
though it requires a powered dual aspect screen.
On: 12 V output
Off: No output
❖
How to Operate the Trigger 2 Menu
1. Select the desired menu item and press the
2
button.
The setting item will appear on the screen.
2. Use the
3
and
4
buttons to set the item.
3. Press the
1
button to enter the setting and return to menu item selection.
INPUT ASPECT
MENU V-MUTE
ENTER
2.
1, 3
INPUT PATTERN
ENTER
2
1,3
Picture Adjust
Setting
Display
System
Config
Trigger 2
Preset
Full
Normal
Through
Zoom
On
On
On
On
Menu Standard 1
Trigger 2
INPUT ASPECT
MENU V-MUTE
ENTER
2.
1, 3
INPUT PATTERN
ENTER
2
1,3
Yes No
Reset All ?