Maytag MAV7580EWW Installation - Manual (Page 7)

tallation is completed, be sure to remove tub block.
Step 12
Once the machine is level, tighten both front
leveling leg locking nuts with a wrench. Once
again, reset the rear stabilizer as described in
Step 10. On models equipped with a felt
sound deflector under the front of the machine,
the felt should be tucked under the machine.
Step 13
Remove tape from the lid. Open the lid to
remove the styrofoam tub block. Remove any
remaining shipping materials.
Remove the protective film from the fascia.
Step 14
Check the operation by using the check list
provided.
CHECK LIST
■
Tub block, parts package and instructions have been removed from the tub.
■
Washer has been properly grounded and plugged into a polarized electrical outlet.
■
Water has been turned on. Check for leaks at faucets and water valve connections.
■
Drain hose is properly located into drain facility and is not twisted or kinked.
■
Washer has been leveled with legs firmly on the floor. The front leveling legs’ locking nuts
have been tightened.
■
Fill washer, checking for the correct water temperature.
■
After the washer has filled, let the washer agitate.
■
Spin the water out.
■
Demonstrate washer usage to consumer. Be sure to leave these instructions and the
User’s Guide with the owner.