Maytag MMV5100AAB Installation User Manual

Page 13

Advertising
background image

13

MOUNT THE MICROWAVE OVEN

Carton will be used in order to assist positioning the microwave oven during
mounting.

•

Measure the height from cooking surface (or countertop) to the bottom
edge of the top cabinet.

•

Cut out carton A along one of the dotted lines

. Determine the correct line

according to the height you just measured (Fig. 1).

Example: If the height is 33", cut the line marked 33".
If the correct height is not shown on the box, draw a line between the
two closest lines. For example, if the height is 32", draw a line 2" below
the line marked 30", and then cut the box along the line you have drawn.

•

Cut out carton B (Fig. 1) along the dotted line

. Then remove staple on

the bottom of carton B (carton B’, Fig. 2).

•

Place cut portion of Carton A on top of the range.
NOTE: Prepare phillips screw driver, bolts and washers on top of the upper
cabinet. Protection of the range cooking surface is recommended.

If the dimension is over 36”

, do not use carton. At least two people will be

required to lift and mount the microwave oven.

,,

Measure here

A

A

Carton A

Carton B’

30”

33”

36”

Fig. 1

Fig. 2

Carton B

B

OTR-Installation-M1.fm Page 13 Wednesday, September 27, 2000 4:03 PM

Advertising
This manual is related to the following products: