Maytag MMV5100AAB Installation - Manual (Page 7)

7
PREPARE HOOD FAN
WALL VENTING
• Remove the 6 screws that attach frame bracket to top of microwave oven.
Carefully slide hood fan out of the microwave oven. Rotate hood fan so that
the exhaust ports face the rear of the microwave oven as shown. Place hood
fan back into microwave oven.
• Reattach frame bracket with 6 screws.
• Check that damper assembly moves freely before you insert it into frame
bracket. Slide and insert damper assembly into frame bracket as shown.
OTR-Installation-M1.fm Page 7 Wednesday, September 27, 2000 4:03 PM