Measurement Computing CB-NAP-7000D - Manual (Page 27)

NAP7000D User Manual (Version 1.0) ---- 27
Fig 2-19 Control the desired output value of CB-7021 by Excel.
Step 3: Pressing one of these 3 command buttons to decide the output value. .
Step 4: Entry the module address for the selected module. In this case, please enter
3.
Step 5: Select the exact baud rate in the Baud Rate Combo for the selected module.
Step 6: Select the status of checksum(Disable or Enable). Notice, the status of
checksum must be exact to your physical CB-7000 series module device. If you
select Enable, you must to enable checksum status for CB-7000 module. The default
setting for CB-7000 series module is disable.
After above six steps, the setting window shown as Fig 2-21.