Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 101)

Section 5 Command Descriptions
5.31
MODE CA
BUS STATES ATN•UNL,MLA,TAG,*ATN,data…,ATN (With addr)
*ATN, data…, ATN (Without addr)
EXAMPLES PRINT#1,"ENTER16" Read data from device 16.
INPUT#1,A$
PRINT#1,"ENTER16" Read an entire line of data from
LINE INPUT#1,A$ device 16 even if it contains
commas or other punctuation.
PRINT#1,"ENTER16;CR" Read data from device 16 until
INPUT#1,A$ CR is encountered.
PRINT#1,"ENTER16 EOI" Read data until EOI is detected.
INPUT#1,A$
PRINT#1,"ENTER 0702" Read data from device 7,
INPUT#1,A$ secondary address 2.
PRINT#1,"EN 12 #5" Read 5 bytes from device 12.
A$=INPUT$(5,#1) INPUT$ gets 5 bytes from file #1
PRINT#1,"ENTER #20" Read 20 more bytes.
A$=INPUT$(20,#1)
PRINT#1,"ENTER ;20" Read 20 more bytes.
A$=INPUT$(20,#1)